Advertisement
STR 300S
NOTE:
The frame must be parallel with the ground when the basic settings are entered!
1. Front tool System Disc
If the front and rear discs have different distances to the ground, adjust the push rods (A) in order to bring
the front and rear discs to the same distance to the ground.
2. CrossBoard
The relationship between CrossBoard and SystemDisc can be set to three different values:
A
•
CrossBoard far up in order to go deeply with SystemDisc.
B
•
Normal position.
C
•
CrossBoard far down if you do not want to use SystemDisc.
NOTE:
If the machine is equipped with a track eradicator, this must also be rest when the CrossBoard is
adjusted. See next page.
4
Settings
A
B
C
A
01.03.2017
Advertisement
