Table of Contents
Advertisement
2.4
SAS Device Cables
2.4.1
Connecting the ServeRAID-MR10M Controller to a Drive
Enclosure
2-6
includes software drivers for the supported operating systems,
along with documentation. You can download the latest drivers
at http://www.ibm.com/systems/support/. For updates, click
Downloads and drivers.
For details on installing the driver, refer to the ServeRAID-MR
Device Driver Installation User's Guide on the ServeRAID-MR
Support CD. Be sure to use the latest Service Packs provided
by the operating system manufacturer and to review the
readme file that accompanies the driver.
This section provides step-by-step instructions for connecting the
ServeRAID-MR10M controller to a drive enclosure containing SAS
physical disks, SATA II physical disks, or a combination of both disk
types.
Figure 2.2
shows how to connect a Mini SAS x4 connector and cable
from the ServeRAID-MR10M controller to a drive enclosure.
Follow these steps to connect the controller to a drive enclosure.
Step 1. Connect the Mini SAS x4 connector on one end of the cable to
an external port on the controller.
Step 2. Connect the other end of the Mini SAS x4 cable to the external
port on the drive enclosure.
ServeRAID-MR10M SAS/SATA Controller Hardware Installation
Advertisement
Table of Contents
