Honeywell PW-6000 Installation And Configuration Manual page 36

SNET reader types require various settings, depending on the SNET reader type that is
being used. You can configure these settings at the logical device or you can
pre-configure them in the hardware templates. The advantage of using the hardware
template is that the configured settings are applied each time that a new logical device
is created, so it saves time when these are configured with the settings that you want to
use.
To configure the settings in the hardware template:
1. Go to
2. Select
3. Double-click the appropriate template.
4. Select the tab
5. Double-click on
6. Select the tab
32
Hardware Configuration
Hardware Templates
Device Types
.
Reader
PW-5000/6000 Reader
Figure 15: Hardware Configuration Settings
.
.
.
.
www.honeywell.com