Honeywell PW-6000 Installation And Configuration Manual page 34

3. Set the port configuration for the Pro-Watch channel:
30
e. From the Setting menu, select Apply, Reboot. The system will
display the "Board is Restarting" message.
a. In Pro-Watch, click Hardware Configuration on the left navigation
bar.
b. Right click on your Site to launch the mini pop-up menu.
c. Select New > Channel to display the Create a Channel dialog box.
d. Click the Channel Type drop-down list and select PW-5000. The
icon of the newly created PW-5000 channel will display in the right
pane.
e. Right click on the icon of your PW-5000 channel and select
Properties to display the Edit Channel Screen dialog box.
This screen displays configuration fields for the Primary Port
(related to the Primary Host on the web server) as well as the
Secondary Port (related to the Alternate Host Port on the web
server).
f. For both Primary and Secondary ports, select the appropriate values
for the following configuration fields:
– If the Port Type is Hard Wired (related to Serial-RS485 web
server host port), then fill in the following settings:
• ComPort
• Baud
– If the Port Type is TCP/IP (related to IP Server web server host
port), then fill in the following settings:
• IP Address
• Port Number
If you are using a modem, and the modem uses a procedure that
Note:
calls Pro-Watch, then the modem must be the primary port.
www.honeywell.com