Cabledata ® Collector (Cdc) Hardware; Kit Contents; General - EA Technology CableData CDC3 Operating Manual

3660-MANUL-V01.01.00-CDC3 Operating Manual
2. CableData
2.1

Kit Contents

1 x CDC Main Unit
3 x HFCTs
4 x 5m BNC Leads
1 x USB Data & Power Cable
1 x Phase Reference Transformer (CDC2-PRT)
1 x Carry Case
1 x Software USB drive
Operating Manuals
2.2

General

The front panel offers 4x BNC connectors. 3x BNC connectors (1,2,3) are for use with the supplied HFCTs for
data acquisition. The fourth connector (~) is the Auxiliary input, where the phase reference transformer is
connected. Only the supplied phase reference transformer specifically designed for the CDC should be used
on this input. Each channel can be identified from the top enclosure label.
The rear of the CDC contains the following connectors:
SD card slot:
Three status LEDs
Mini USB Connector
Ethernet Socket
® Collector (CDC) Hardware
Figure 1
Currently unsupported/functional.
Do not insert an SD card into this slot.
Further information on the LEDs in section 2.3.
Used for instrument power and communication. The CDC is supplied with a
split USB Cable allowing more power to be drawn from additional USB source
if required.
Currently unsupported/functional.
Do not insert network cables into this socket.
CDC Top View
Page 2 of 30