EA Technology CableData CDC3 Operating Manual page 26

3660-MANUL-V01.01.00-CDC3 Operating Manual
4.4.8 Progress Indication
When the data capture process is started, an additional progress bar will appear beneath the top visible bar.
The top bar indicates the progress through the different data capture stages as shown in the previous section.
The lower status bar indicates the progress through the current stage. To the right of the lower progress bar is
a text field indicating the current data capture stage.
Figure 42 Started Unfiltered Waveform Capture (time taken is dependent on PD activity)
If data capture is cancelled part way through the data collection process, then both bars will appear full and
remain green similar to when data capture has completed.
If the phase reference source is lost or interrupted during data capture, both progress bars will turn orange.
This is shown in Figure 44.
Figure 44
If there is an error with the device during the data capture, then the status bar will turn red (shown in 0). If
this occurs, unplug the device and close the software and retry.
Figure 40 Data Capture Process Started
Figure 41 Raw Data Capture Process Started
Figure 43 Completed capture for all channels
Progress bar latched orange after losing phase reference source
Figure 45 Capture failed
Page 22 of 30