Connecting The Cdc - EA Technology CableData CDC3 Operating Manual

3660-MANUL-V01.01.00-CDC3 Operating Manual
Select the Installation folder (Figure 13) allows you to select the installation location. It is
recommended to be left at default. You can select whether the software is installed for all users, or
just the current user (logged in).
Figure 13 Selecting Installation Directory
Once installation has completed the following message (Figure 14), click Close to exit.
Figure 14 CDC Wizard Completion Screen
3.2

Connecting the CDC

Before the application can be run for the first time, it is important to make sure that the correct drivers are
installed. To do this, connect the CDC to the PC via USB cable.
The device will automatically power on upon connection. If the CDC has not been connected before, Windows
should take a few moments whilst the drivers are installed. Windows will show a notification upon the
success of the driver installation.
Upon success, the software can be started.
Start > All Programs > EA Technology > CableDataCollector
Page 8 of 30