Table of Contents
Advertisement
3660-MANUL-V01.01.00-CDC3 Operating Manual
4.6
Restoring Software Default Options
It is possible to make changes to the options that appear in the CDC data acquisition software. The list of
Voltages and Cable Types can have user options added, as shown in sections 4.3.2 and 4.3.4. If the additional
options need to be removed, they can be removed using the Remove User Customisations button. This
removes all added options and will only show the default ones.
From the software screen, click the Settings button, shown in Figure 50.
Figure 50
Settings button on main screen
On the Settings screen, there is a button in the bottom left corner labelled Remove User Customisations,
visible in Figure 51.
Figure 51
Remove User Customisations button
The confirmation shown in Figure 52 will be displayed, warning that all of the customisations will be lost.
Clicking the Yes button will continue with the removal. Clicking the No button will return to the Settings screen.
Figure 52
Confirmation of removing user customisations
Page 25 of 30
Advertisement
Table of Contents
