Table of Contents
Advertisement
3660-MANUL-V01.01.00-CDC3 Operating Manual
Uninstalling the CDC Data Acquisition Software
4.7
The CDC data acquisition software must be uninstalled through the Add or Remove Programs interface. To
open the interface, click Start > Settings > Control Panel. In the Control Panel, double click on Add or Remove
Programs. The CDC data acquisition software will be on the list. This can be seen in Figure 53 where it has
been selected. Click the Uninstall button.
4.8
Updating Software
If version 1.x of the CDC data acquisition software is already installed, this must be uninstalled before installing
the updated version 2.x.x software. From version 2.x.x onwards, any updates will automatically upgrade the
installed software, meaning the old software will not need to be removed beforehand.
Uninstalling the software will cause the user customisations to be lost, for example custom cable voltages, and
cable types. After uninstalling the software, navigate to the installer application and follow the previous
instructions on installing the software. After installation is completed, the first time that the software is run, the
following warning message might appear:
Pressing the OK button will allow the software to continue and the user customisations will need to be re-
entered.
Figure 53
CDC software in Add or Remove Programs interface
Figure 54
Figure 1 Warning when updating software
Page 26 of 30
Advertisement
Table of Contents
