Heating After A Long Time Of Inactivity/During First Use - Silvercrest SEMS 1100 A1 Operating Instructions Manual

Heating after a long time of inactivity/during first use
If you have not used it for some time, preheat the appliance as follows:
1) Fill the water tank
2) Place either the large
–
Make sure that the small indentation on the large
sieve
inserted.
–
Then turn the large
cannot fall out.
NOTE
► Wait until the espresso sieve
► In order to remove the espresso sieves
the inserted espresso sieve
sieve
You can now remove the espresso sieve
SEMS 1100 A1
with tap water.
or the small espresso sieve
is located above the indentation on the sieve holder
or small espresso sieve
until the indentation on the espresso
is located directly above the indentation on the sieve holder
in the sieve holder
slightly to ensure it
has cooled down before taking it out!
from the sieve holder
.
GB │ MT
:
or small espresso
when
, turn
.
│
59 ■