Cleaning The Milk Frother - Silvercrest SEMS 1100 A1 Operating Instructions Manual

Cleaning the milk frother

CAUTION! PROPERTY DAMAGE!
► NEVER use abrasive, corrosive or chemical agents to clean the appliance.
These could damage the outer surfaces of the appliance.
1) Place an empty container under the milk frother
2) Turn the steam control
for a few seconds.
3) Close the steam control
appliance off and remove the plug from the mains power socket.
4) Allow the nozzle to cool down.
5) Pull the casing of the milk frother
warm water.
6) Wipe the nozzle under the casing with a damp cloth. If necessary, add a little
mild detergent onto the cloth. After cleaning with detergent, always wipe off
with a cloth moistened with clean water. Ensure that there is no detergent
residue left on the nozzle.
7) Push the casing back onto the nozzle (Figure 1).
Figure 1
SEMS 1100 A1
to immediately after use and let the steam escape
(turn it towards "0" as far as it will go), switch the
off (Figure 1) and clean it thoroughly in
.
GB │ MT │
65 ■