E22-400M33S User Manual Disclaimer EBYTE reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or any part thereof without the express permission of EBYTE is strictly prohibited.
E22-400M33S User Manual 1. Overview 1.1 Introduction E22-400M33S is based on the new generation of LoRaTM RF chip SX1268 produced by Semtech in the United States as the core of independent research and development of the maximum power of 2W and suitable for 433/470MHz SMD LoRaTM wireless module, using industrial-grade high-precision 32MHz crystal oscillator.
E22-400M33S User Manual Industrial-standard design, supporting extended use at -40 to +85°C. Dual antennas optional (IPEX/stamp hole) for user-friendly secondary development and easy integration. 1.3 Application Scenarios Home security alarms and remote keyless entry. Smart home as well as industrial sensors, etc..
Page 6
E22-400M33S User Manual Dormant current(uA) Software shutdown Maximum transmitting power(dBm) 33.0 33.5 32.5 Reception sensitivity(dBm) -124 -125 -126 Airspeed 0.3kbps 0.6k 300k User-programmed control airspeed(bps) 0.018k 62.5k User-programmed control Main parameters Description Remarks Clear and open, antenna gain 5dBi, antenna height 2.5m, air rate...
E22-400M33S User Manual 3. Mechanical dimensions and pin definition Pin Serial Pin Name Pin Usage Number Orientation Ground wire, connected to power reference ground Ground wire, connected to power reference ground Ground wire, connected to power reference ground Ground wire, connected to power reference ground...
E22-400M33S User Manual BUSY Output For status indication (see SX1268 manual for details) NRST Input Chip reset trigger Input pin, active low MISO Output SPI Data Output Pin MOSI Input SPI Data Input Pin Input SPI Clock Input Pin Input...
E22-400M33S User Manual appropriate isolation and shielding can be done. communication line if the use of 5V level, must be connected in series with 1k-5.1k resistors (not recommended, there is still a risk of damage). try to stay away from some of the physical layer is also 2.4GHz TTL protocol, for example: USB3.0.
E22-400M33S User Manual 5. Basic Applications 5.1 Basic Circuits 6. Frequently Asked Questions 6.1 Communication range is too short The communication distance will be affected when obstacle exists. Data lose rate will be affected by temperature, humidity and co-channel interference.
E22-400M33S User Manual 6.2 Module is easy to damage Please check the power supply to ensure that it is within the recommended value. If it exceeds the maximum value, the module will be permanently damaged; Please check the stability of power source, the voltage cannot fluctuate too much.
E22-400M33S User Manual 9. Antenna Guide 9.1 Antenna Recommendations Antenna is an important role in the communication process, often poor quality antenna will have a great impact on the communication system, so we recommend some antennas as supporting our wireless module and more excellent performance and reasonable price.
About us Technical support: support@cdebyte.com Documents and RF Setting download link::https://www.cdebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com ------------------------------------------------------------------------------------------------- Official hotline: 028-61399028 ext. 821 Web:https://www.cdebyte.com Address: , Building B5, Mould Industrial Park, 199# Xiqu Ave, High-tech Zone, Chengdu, 611731, Sichuan, China...