Transmission Mode (Mode 0); Rssi Mode (Mode 1); Ranging Mode (Mode 2); Sleep Mode (Mode 3) - Ebyte E28-2G4T12S User Manual

SX1280 Wireless Module

6.2. Transmission Mode (Mode 0)

Under this mode, transparent transmission is available, that means the data transmitted from the transmitter will be received
by the receiver in the original format. Under normal mode, the two sides could communicate with each other normally based on
same air data rate, address and channel; under continuous transmission mode, the baud rates on both sides must be the same, it
supports large file continuous transmission under baud rate from 1200bps ~ 115200bps.

6.3. RSSI Mode (Mode 1)

Under this mode, the module will output current RSSI value of 2.4GHz signal every 100ms so as to check the channel quality,
the value is in HEX compliment format.

6.4. Ranging Mode (Mode 2)

(Reserved)

Sleep Mode (Mode 3)

6.5.
Under this mode, Baud rate is fixed as 9600 8N1
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd.
E28-2G4T12S User Manual
9