Power Supply Leds - Cisco SFS 7008 Hardware Manual

Table 5-1: Interpreting the System-Wide LED (see
Color State
Yellow blinking

Power Supply LEDs

Locating the Power Supply LEDs
The Power Supply LEDs are located in the outside of each Power Supply module, if you are facing the
front of the chassis with the bezel cover removed.
Figure 5-2: Power Supply LEDs
Figure
Indication
System identify.
This state is initiated by the user.
This LED can be initiated manually by using the
diag LED test. Refer to the Command Line
Reference Guide for more information.
Example:
To run identity test on Power Supply 1:
config mode -> diag power-supply 1 ->
test led ->
-> start - start flashing
-> stop - stop flashing
5-1)
67