Cisco SFS 7008 Hardware Manual page 68

68
In addition, a Power Supply Identify LED is located on the outside of the chassis, next to the
corresponding power supply. This LED allows the user to initiate a command that causes the Identify
LED to blink, which assists in locating a particular Field Replaceable Unit.
Figure 5-3: Power Supply Identify LED
Replicas of the Power Supply LEDs are positioned on the back of the chassis. Refer to
Interface Module LEDs" on page
Interpreting the Power Supply LEDs
Table 5-2: Interpreting the Power Supply LEDs (see
Color State
Green and off
Yellow
Green solid on
Green off
Yellow off
Yellow solid on
71.
Figure
Indication
No power to the power supply, or LED failure.
Power Supply running with no detected errors.
No power to the power supply, LED failure, or DC
output failure.
Power Supply running with no detected errors.
Operator intervention required. Failure detected
within the Power Supply.
"Management
5-2)