Table of Contents
Advertisement
Setup
1
Installing the Bit
No Parts Required
Procedure
1.
Place the concrete breaker on wooden blocks
with the retainer-pin plugs pointed towards the
ceiling.
2.
Remove the retainer-pin plugs from the concrete
breaker.
3.
Remove the retainer pins
4.
Install the bit; refer to
(Figure
6).
Installing the Bit (page
Product Overview
Specifications
Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight
Bit working length
Bit diameter
Impact energy class
Impact rate
Flow range
8).
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
6
63 cm (24.8 inches)
130 cm (51.2 inches)
33 cm (13.0 inches)
176 kg (389 lb)
29 cm (11.4 inches)
5 cm (2 inches)
339 J (250 ft-lb)
600 to 1150 bpm
20 to 35 L per minute (5.3 to
8.2 US gallons per minute)
www.Toro.com
for a list of all
Advertisement
Table of Contents
