Advertisement
To access the brushroll, turn the nozzle upside down. Use a coin to turn the locks on the bottom
cover counter clockwise to open the bottom cover and access the brushroll.
Clear away any clogs or debris around the brushroll. Cut away any hair or string. Reattach the
bottom cover, pressing down firmly along all sides.
Turn the locks clockwise to close.
To remove Soft Roller from nozzle, pull the Soft Roller out by the tab. Tap loose debris off the
Soft Roller. Use a dry towel to wipe the Soft Roller clean and to remove any debris caught in the
teeth behind the Soft Roller.
Remove the dustcup from the handvac. Then remove the pre motor filters from behind the dust
cup. Tap filters clean over a bin to remove any excess dirt and debris.
Remove the post motor filter that surrounds the motor behind where the Dust Cup was
previously seated. Tap it over the trash to remove any excess debris.
Advertisement
