Advertisement
Turn the nozzle over, clear away all debris from both rollers, the brushroll chamber and endcaps.
Inspect ends of the soft roller for any signs of wear.
My vacuum has low suction or no suction at all.
Have you tried using the boost function? This mode can provide added suction power to the
vacuum to help pick up stuck on debris.
NOTE: This mode has a shorter runtime
My Vacuum is noisier than expected.
Note: The lower power modes (ex: Bare Floor ECO or Deep Clean) are significantly less noisy. Boost mode specifically is noisy
due to the high power.
Remove the handheld vacuum from the wand. Turn on the Handheld.
My Vacuum smells like burning.
Note: There may be a new motor smell for the first couple uses.
Turn off the vacuum.
Disassemble the unit. Remove the handheld vacuum from wand, the wand from the floor nozzle.
Advertisement
