Setup Instructions; Installing/Replacing The Battery - Omega OM-143 User Manual

Usb rh/temperature/gpp data logger with lcd display
Table of Contents

Advertisement

Display Legend
: indicates reading is higher than high alarm setpoint
for that parameter
▼: indicates reading is lower than low alarm setpoint
for that parameter
%RH: relative humidity unit
°C: Celsius temperature unit
°F: Fahrenheit temperature unit
[-]188.8: Humidity or temperture value or one of the
following four working status indications
LOG: Unit is logging data
- - -: Unit is in standby mode, ready to log data
FUL: Internal memory is full (and logging has been
stopped)
CON. Unit needs to be configured by software

SETUP INSTRUCTIONS

INSTALLING/REPLACING THE BATTERY

LATCH
The OM-143 uses a 3.6VDC "1/2 AA" Lithium-ion battery.
To open the battey compartment, use a paper clip or a
screwdriver with a fine point to push in the silver flange
showing through the small square hole in the rear of the unit
Fig. 1b .
All possible
display
indications
on the OM-143
7

Advertisement

Table of Contents
loading

Table of Contents