Appendix E. Software Build Instructions; Scr Bootloader; Getting The Sources; Building Scr Bootloader - Syntacore SCR1 SDK Quick Start Manual

10. Appendix E. Software build instructions

This build guide describes how to build software provided as a part of the SCR1 SDK.

10.1. SCR bootloader

10.1.1. Getting the sources

$ git clone git@github.com:syntacore/sc-bl.git

10.1.2. Building SCR bootloader

Follow the instructions in sc-bl/README.md to build bootloader for target plaforms ('scbl.hex' for
Terasic DE10-Lite, 'scbl.mem' for Digilent Arty).

10.2. Zephyr OS

10.2.1. Getting the sources
$ git clone git@github.com:syntacore/zephyr.git

10.2.2. Building Zephyr OS

Follow the instructions in
and zephyr/README.md to build Zephyr OS image for target plaform.

10.3. SCR1 OpenOCD

10.3.1. Getting the sources
$ git clone -b syntacore https://github.com/syntacore/openocd

10.3.2. Building and using OpenOCD

Please, refer to the Syntacore OpenOCD wiki page for instructions:
openocd/wiki/OpenOCD-for-sc_riscv32
https://www.zephyrproject.org/doc/getting_started/getting_started.html
https://github.com/syntacore/
17