GENERAL WARNINGS Read carefully the following instructions as they provide important information concerning how to install, use and care for this appliance. After removing the appliance from its packaging, ensure that it is in perfect condition. In case of doubt, do not use this appliance and ask qualified person. All the parts of the packaging (plastic bags, foam polystyrene, nails etc.) must be kept out of the reach of children as they are potentially dangerous.
Page 4
or things for which the manufacturer cannot be held responsible. In case the appliance has an earth connection, the electrical safety is ensured only when the appliance is correctly connected to an efficient earthing installation in conformity with the existing safety standards. It is necessary to verify this important safety requirement and in case of doubt, to require an accurate check-up of the installation by a qualified person.
Page 5
• the filling cap (1) has to be checked/substituted in case it falls down during the ironing. It has to be replaced every 3 months for professional use and every 30 months for household use maximum to guarantee the safety of the product. •...
Page 6
facilitated, as you can adapt and control the temperature, the production and the flow of the steam. There is no need to press with the iron as the penetrating steam does nearly everything. • Ordinary laundry - Thanks to the high pressure, the laundry is ironed faster and better than ever, even if there are several layers.
- Steam delivery adjustment (2) With the steam delivery adjustment (2), it is possible to select the steam quantity that you wish, during your ironing: Rotating steam delivery adjustment clockwise you will have lower steam output while rotating it anticlockwise you will have higher steam output. - Pressure gauge (6) With the professional pressure gauge (6) you have under constant control the pressure of the boiler.
• unscrew carefully the filling cap (1) • wait 2 to 3 minutes, then slowly fill with warm water. Screw on the filling cap (1), plug in the appliance to the mains, turn on the boiler switch (3) and the steam/iron switch (4) and wait for the boiler switch light (3) to turn off.
filling cap (1) to let out the air pressure. Then screw on the filling cap (1) and turn on the boiler switch (3) and the steam/iron switch (4). TECHNICAL FEATURES MODEL PS4500 Voltage 1450 W + 230V~50Hz 850 W...
Need help?
Do you have a question about the PS4500 and is the answer not in the manual?
Questions and answers