Related Manuals for Walker Edison DWASH1D
Summary of Contents for Walker Edison DWASH1D
-
Page 2: General Assembly Guidelines
Power tools should not be used to assemble this product. VIII. Drill may be needed for securing product to wall. © © Copyright Copyright 2020 b 2020 b Walker Edison Furniture Co., LLC. All rights reserved. Walker Edison Furniture Co., LLC. All rights reserved. -
Page 3: Parts List
Parts List © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Insert wooden dowel (A) into parts (4,5,6) as per diagram.
- Page 6 Insert wooden dowel (A) into parts (1,7,8) as per diagram.
- Page 7 Secure cam bolt (B) into parts (1,4,12) with Philips head screwdriver as per diagram.
- Page 8 Secure cam bolt (B) into parts (2,3) with Philips head screwdriver as per diagram.
- Page 9 Pick up the slider arm (N) and separate the slide Runner for the following Steps. Extend the Slide .Runner all the way forward,press the plastic release lever of the slider arm up and pull the Slide Runner Complete out .
- Page 10 Using screw (K) attach slider (N) to parts (5,6,9,10) with Philips head screwdriver as per diagram.
- Page 11 Using screw (J) attach parts (9,10) to part (11) with Philips head screwdriver as per diagram. then put part (13) as per diagram.
- Page 12 Using cam lock(D) secure part (12) to parts (9,10) with Philips head screwdriver as per diagram.
- Page 13 Using screw (F) attach part (7) to parts (5,6) with hex key (G) as per diagram.
- Page 14 Using cam lock(C) secure part (4) to parts (5,6,7) with Philips head screwdriver as per diagram.
- Page 15 Using cam lock(C) secure part (7) to part (4) with Philips head screwdriver as per diagram.
- Page 16 Using cam lock(C) secure part (1) to parts (4,5,6) with Philips head screwdriver as per diagram.
- Page 17 Using cam lock(C) secure part (3) to parts (1,4) with Philips head screwdriver, then using bolt (L) attach part (6) to part (3) with Hex key (G) as per diagram.
- Page 18 Using cam lock(C) secure part (2) to parts (1,4) with Philips head screwdriver as per diagram.
- Page 19 Using screw (H) attach part (8) to part (1) with Philips head screwdriver as per diagram.
- Page 20 Place sticker (E) cover the holes as per diagram ,and please pay attention on color of sticker.
- Page 21 Assembled the drawers as per diagram Note :If the drawer does not go in smoothly .Press or lift the plastic release lever . Pull out the slider bracket from the slider arm then re-assembled the drawer until they were going in smoothly well .