Advertisement
Quick Links
Advertisement
Related Manuals for Walker Edison D42LILLT
Summary of Contents for Walker Edison D42LILLT
- Page 1 Item # : D42LILLT Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 02/01/2020 (E) Walker Edison ® Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. ©...
-
Page 2: General Assembly Guidelines
Concealed hinges are three-way adjustable. Horizontal In-and-Out Vertical by screw adjustment by loosening the hinge-arm Via slots in the mounting mounting screw or via cam plate or via cam adjustment adjustment © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. -
Page 3: Parts List
Parts List © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. -
Page 4: Hardware List
Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. ©... - Page 5 Step 1 Using bolt (E) attach parts (15,18) to parts (16,17) with Hex key (F) as per diagram. Note: Do not fully tighten all the bolts . © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Step 2 Insert wooden dowel (A) into part (10) ,then secure cam bolt (B) into parts (11,13) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Step 3 Insert wooden dowel (A) into part (6,7,8,9) as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 8 Pick up the slider arm (S) and separate the slide Runner for the following Steps. Extend the Slide .Runner all the way forward,press the plastic release lever of the slider arm up and pull the Slide Runner Complete out . © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 9 Step 5 Using screw (M) attach slider (S) to parts (7,9,21,23) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved.
- Page 10 (B) into part (3) , then using cam lock (C) secure part (6) to part (11) ,part (8) to part (13) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.10...
- Page 11 Step 7 Using screw (J) attach part (10) into parts (6,7,8,9) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.11...
- Page 12 Using screw (H) attach Europe hinge (G) into part (1) , then using screw (M) attach part (5) to part (1) with Philips head screwdriver as per diagram. Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.12 ©...
- Page 13 Step 9 Using screw (H) attach Europe hinge (G) into part (10) with Philips head screwdriver as per diagram. Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.13 ©...
- Page 14 Using Cam lock (C) attach part (3) to parts (7,9) with Philips head screwdriver as per diagram. If necessary, refer to page 2 to adjust the gap between part (1) and part (3). Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.14 ©...
- Page 15 Step 11 Put part (12) as per diagram. Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.15 ©...
- Page 16 Step 12 Using screw (J) attach part (14) to parts (6,7,8,9,10,11,13) with Philips head screwdriver as per diagram. Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.16 ©...
- Page 17 Step 13 Using bolt (E) attach parts (15,18）into part (14) with Hex key (F) as per diagram. Note : Fully tighten all the bolts . Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.17 ©...
- Page 18 Step 14 Using screw (L) attach handle (K) into part (19) ,and secure Cam bolt (B) into part (19) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.18...
- Page 19 Step 15 Using screw (J) attach part (21,23) to part (22) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.19...
- Page 20 Step 16 Put part (20) as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.20...
- Page 21 Step 17 Using cam lock (C) secure part (19) to parts (21,23) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.21...
- Page 22 Step 18 Place sticker (D) cover the holes as per diagram . © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.22...
- Page 23 © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.23...
- Page 24 Step 20 Using screw (M) attach hinge (N) to parts (2,4) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.24...
- Page 25 Step 21 Using screw (M) attach hinge (N) to part (10) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.25...
- Page 26 (N) to the flip door (4), Finely adjust one side of the flip door (4) up or down, and then lock the hinge (N). Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.26 ©...
- Page 27 Step 23 Using screw (M) attach hinge (N) to part (10) with Philips head screwdriver as per diagram. © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.27...
- Page 28 (N) to the flip door (2), Finely adjust one side of the flip door (2) up or down, and then lock the hinge (N). Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.28 ©...
-
Page 29: Final Assembly
Step 25 Final Assembly © Copyright 2019 b Walker Edison Furniture Co., LLC. All rights reserved. P.29...