Related Manuals for Walker Edison D42CORMB
Summary of Contents for Walker Edison D42CORMB
-
Page 3: Parts List
Parts List 厂 问 Copyright©2019 by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 4: Hardware List
Hex Key � Glue tube Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright©2019 by Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Step 1 � Attach part (1) to part (2,3) , secure bolt (G )onto part (1) with hex key (L) per diagram. Copyright©2019 by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Insert wooden dowel (C) into part (6,7,8) , secure cam bolt (A) to part (4) with Philips head screwdriver.
- Page 7 Attach part (4) onto part (3) , using bolt (G) with hex key (L).
- Page 8 Insert part (6,7,8) to part (4),then secure cam lock (B)to part (6,7,8) with Philips head screwdriver.
- Page 9 Insert part (5) to part (4,6,8) as per diagram .
- Page 10 Using screw (D) attach part (9) to part (6,7,8) to secure with hex key (L) .
- Page 11 Using bolt (G) to attach part (10,11) to part (9) , insert to part (11) with hex key (L), using bolt (J) insert to part (10) to secure with hex key (L) .
- Page 12 Using bolt (G,H) attach part (13,6,10,11,12) secure with hex key (L) per diagram .
- Page 13 Using bolt (G,H) attach part (13) onto part (8,10,11,12) , secure part (8,10,11,12) with hex key (L) per diagram.
- Page 14 Using screw (F) attach plastic wedge (E) onto part (5) with Philips head screwdriver as per diagram.
- Page 15 Put the hole cover (K) to part (4), put part (14) to part (2) as per diagram .