Download Print this page

Magic Chef MCSDW8TCST Installation Manual page 4

Hide thumbs Also See for MCSDW8TCST:

Advertisement

• Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload. The
dishwasher is designed for an electrical supply of 120V, 60Hz AC, and should be connected to a
dedicated, properly grounded 15 A circuit with a fuse or circuit breaker.
These requirements must be met to prevent injury and damage to the unit. Consult a qualified
electrician if in doubt.
• This dishwasher includes a heating element. DO NOT touch the heating element during or immediately
after use.
• DO NOT use any extension cord or portable outlet device to connect the dishwasher to a power
supply.
WARNING: Danger of suffocation! Ensure that any plastic wrappings, bags, small pieces, etc. are
disposed of safely and kept out of the reach of children.
• Remove the door to the washing compartment when removing an old dishwasher from service or
discarding it. Ensure that the appliance presents no danger to children while being stored for disposal.
• Old appliances may contain materials that can be recycled. Please contact your local recycling
authority about the possibility of recycling these materials.
• NOTE: The dishwasher drain hose must be installed with a drain loop at least 28" (710mm) off the
cabinet floor or the unit may not drain properly.
• This dishwasher is intended for residential use only, and should not be used in commercial
establishments.
• If the dishwasher is a new installation, most of the work must be done before the dishwasher is moved
into place.
• If the dishwasher is replacing a previously installed unit, check the existing dishwasher connections for
compatibility with the new dishwasher and replace parts as necessary.
4

Advertisement

loading