Safety Instructions - Data-Tronix DT-NTSC-32 User Manual

Safety Instructions

Read this manual carefully before operating this device.
•
Removal of device cover without permission may cause harm and void the warranty.
•
Handle the device with care to avoid dropping, possibly causing damage to the internal
•
hardware parts.
Keep all inflammable, metal and liquid materials away from the device housing, to avoid
•
causing damage to the device.
• Avoid installation in dusty places and places with heating resources nearby. Avoid
installation in direct projection of sunlight.
Connect the grounding connector on the rear panel to protective earth contact properly
•
while in operation.
Ensure the proper type of cable connectors are used for connecting network interfaces
•
of the device.
Avoid rapid and frequent powering on/off, as it may cause damages to the
•
semiconductor chipsets.
• Keep proper direction of the power cord when plugging into or out of a power socket.
• Connect the grounding pole and signal cable before connecting the power cord.
Do not touch the power socket with wet hands to avoid electric shock.
•
Remove all jewelry, such as rings, necklaces, watches, bracelets, etc., before operating
•
this device. Failure to do so may lead to a possible short circuit and result in components
being damaged.
Make sure the AC power is unplugged in case of operator services within the device
•
casing or close to power supply are needed.
Only trained and approved staff are permitted to perform live line operation and
•
maintenance within the device casing.
• Ensure good ventilation while the device is in operation. Failure to do so may cause
damage to the device due to overheating.
It is recommended to unplug the power cord from the socket if the device will not be
•
used for a long period of time.
DT-NTSC-32 Manual
2