Advertisement
Installation (cont.)
Decor Star
4. Secure the mounting brackets to the wall.
5. Apply thread sealant tape to the threading on
the shut off valves before connect both hot and
cold water supply hoses to the valves. Turn on
the valves and check all connections for possible
leaks.
6. Hang the unit on the wall to complete the instal-
lation. Make sure the unit is seated properly. Apply
silicon sealant on left and right sides of the shower
panel. (NOTE: do not seal the bottom of the panel,
this will allow any possible future leaks to drain out
the panel)
8
PL-023-SS Rev. A2 012016
Advertisement
