Table of Contents
Advertisement
11.2 Drain of unit
1) Open tank lid.
2) Place appropriate vessel under drain cap.
3) Open drain cap and release liquid from tank.
4) Blow compressed air through unit's liquid inlet to evaquate coolant from heat exchanger into tank.
5) Close tank lid and drain cap.
11.3 Re-packaging of the unit
➢ The unit has been emptied (see chapter 11.1).
1)
Lift the unit with a forklift or jacklift and place a transportable pallet under it.
2)
Enclose the unit including the transportable pallet with shrinking foil and shrink the foil tight.
The unit is ready for transportation.
11.4 Storing the Unit
The storage area must be even and the unit should not stand on an edge or other obstructive object.
The environmental conditions for storage of the unit or parts of it can be found in the specification paragraph
on page 16.
11.5 Disposal
The unit was manufactured mainly from recycable material.
Make sure the components of the unit end up at a qualified company for disposal and recycling.
Contact LAIRD THERMAL SYSTEMS for take back of end-of-life units (see company contact on page 7 or
ask an qualified company for disposal and recycling.
11.6 Disposal of Operating Materials
The operating materials of the unit can be hazardous to the environment and to health.
• Make sure the operating materials are disposed of or recycled according to local regulations.
• Also, the safety specifications of the coolant manufacturer must be obeyed.
Laird Thermal Systems s.r.o
33
Operation Manual, 387009851
Dismounting, Disposal, Storage
Date: 08/09/2022
Version: 1.0
Drain of unit
Liquid-Air Cooling Unit LA 5000
387009381
Advertisement
Table of Contents
