9.Furnace G Terminal Alert; 10.Furnace G Terminal Alert Label - Bryant Evolution Connex Control Installation Instructions Manual

6.3.3.9. Furnace G- - Terminal Alert
Use the alert function to select the contact state for an alert. Select Normally Open
or Normally Closed, and then save your selection.
Shutdown: This setup option selects the change of state required for shutdown.
Select Normally Open or Normally Closed, and then save your selection.
6.3.3.10 Furnace G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main
screen and in the notification email when the alert becomes active.
46
A13230
A170248