Setup And Status Information (Dealer- - Provided Router) - Bryant Evolution Connex Control Installation Instructions Manual

If you have any issues, please contact your servicing dealer or contact the
S
support desk at 1- - 800- - 428- - 4326.
When the connection to the MyEvolution web server has been established, the
S
status screen will show Connected for both Wi- - Fi and the server.

7.2 Setup and Status Information (Dealer- - provided Router)

To establish the Wi- - Fi
through the Evolution System Wireless Access Point (TP- - LINKR Device), connect
the WAN (BLUE port) connection of TP- - LINK Wireless Access Point to the
home's existing router LAN port using the provided Ethernet cable. The LAN ports
on the back of the TP- - LINK Wireless Access Point should not be used for other
devices. The Evolution (TP- - LINK) Wireless Access Point should only be used for
connection of the Evolution Connex Control(s) and is not intended to be used wired
or wirelessly with any other devices.
®
network connectivity to the Evolution Connex Control
88
A13242B