Heartland Classic 9800 Use And Care Manual page 30

30” built-in wall oven
Hide thumbs Also See for Classic 9800:
Table of Contents

Advertisement

To activate Sabbath Mode:
1.
Press Setup pad.
2.
Press the down
arrow to scroll
down.
3.
Select Sabbath.
4.
Select Auto or Manual.
Auto is used to automatically convert to Sabbath Mode
every Friday at 2 pm, and stay in Sabbath Mode for 76
hours.
Manual sets the oven to Sabbath Mode instantly for 76
hours.
5.
Select Auto or Manual as desired.
6.
Select Yes or No.
7.
Select Set.
Sabbath Mode Notes:
The oven must be idle to program Sabbath Mode.
Sabbath Mode cannot be turned on if the keypads
are locked out or when the door is locked.
If the oven is baking when Sabbath Mode is set, there
will be no audible beeps.
All prompts, messages and beeps are deactivated
when the Sabbath Mode is active.
If the oven light is desired while in Sabbath Mode, it
must be turned on before the Sabbath Mode is set.
When the Sabbath Mode is started, the temperature
display will immediately show the set temperature,
rather than the actual oven cavity temperature. No
preheat beep will sound.
The self-clean cycle and automatic door lock do not
operate during the Sabbath Mode.
Pressing the CANCEL pad will cancel a Bake cycle,
however the control will stay in the Sabbath Mode.
Temp Adjust
Oven temperatures are carefully tested at the factory. It is
normal to notice some baking time or browning differences
between a new oven and an old one. As ovens get older,
the oven temperature can shift.
You may adjust the oven temperature if you think the oven
is not baking or browning correctly. To decide how much
to change the temperature, set the oven temperature 25° F
higher or lower than the temperature in your recipes, then
bake. The results of the first bake should give you an idea of
how much to adjust the temperature.
To adjust the oven temperature:
1.
Press Setup pad.
2.
Press the down arrow to scroll down.
3.
Select Temp Adjust.
4.
Select upper oven or lower oven (select models). "Set
temperature offset using the keypad" is displayed.
5.
Enter the desired temperature change. The temperature
can be increased or decreased by 5° to 35°.
6.
Select "+/-" to indicate an increase or decrease in
temperature. The temperature change is displayed at the
top of the window.
7.
Press Enter pad to accept the change.
The oven temperature does not need to be readjusted if
there is a power failure or interruption.
Broiling and cleaning temperatures cannot be adjusted.
208/240V
For improved results when using Bake, the oven can be set
from 240V to 208V if your household is on 208V.
To set the oven to 208V:
1.
Press Setup pad.
2.
Press the down
arrow to scroll
down.
3.
Select 208/240V.
4.
Select 208 or 240 using the Quickset pads.
5.
Select Set.
Tones (beeps)
The number of beeps heard at the end of cooking and at the
end of timer operation and their volume can be adjusted.
To adjust the beeps:
1.
Press Setup pad.
2.
Use the down
arrow to scroll
down.
3.
Select Tones.
To change the beeps at the end of cooking:
1.
Select Cook.
2.
Select 1-30 to hear one beep every thirty seconds.
OR
Select 1-60 to hear one beep every sixty seconds.
OR, use the down arrow to scroll down.
Select 1 Beep to hear one beep only at the end of cooking.
3.
Select Set.
4.
Press the Setup pad to exit.
29
Classic 9800

Advertisement

Table of Contents
loading

Table of Contents