Introduction; Device Description; Scope Of Delivery - Scheppach DP18VARIO Translation Of The Original Operating Manual

1. Introduction

Manufacturer:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified.
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating instructions include important instruc-
tions for the safe, proper and economic operation of
the machine, for avoiding danger, for minimising re-
pair costs and downtimes and for increasing the reli-
ability and extending the service life of the machine.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the machine in your country.
Keep the operating manual package with the ma-
chine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The machine may only be used by personnel who
have been trained to use it and who have been in-
structed with respect to the associated hazards. The
required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1-2)
1. Machine foot
2. Column
3. Clamping handle
4. Drilling table
5. Engine
6. Speed adjustment lever (handle)
7. V-belt cover
8. Digital display
9. On and off switch
10. Handle
11. Folding swarf protector
12. Drill chuck (illustration may differ)
13. Roller support
14. Machine head
15. Working light/laser control panel
16. Depth indicator with stop
17. Crank handle
18. Drilling table holder
19. Hexagonal bolt
20. Crank holder
21. Wing screws
22. Tapered mandrel
A. Hexagon spanner
B. Taper key
C. 4 mm Allen key
D. 3 mm Allen key

3. Scope of delivery

• 1 Drilling machine
• 1 Drilling table
• 4 Handles
• 1 Folding swarf protector
• 2 Wing screws
• 5 Hexagon screws
• 1 Clamping handle
• 1x 3 mm Allen key
• 1x 4 mm Allen key
• 1 Hexagon spanner
• 1 Taper key
• 1 Chuck
• 1 Column
• 1 Machine foot
• 1 Crank handle
• 1 Operating manual