Table of Contents
Advertisement
Setting
Setting - <Setting>
Lens setting menus
A variety of lens settings are available.
Setting screen
<Setting>
I G :
5 0
I-Gain:
50
RBF: 000
System
AF
Zoom
Focus
Iris
IS
Reset All
1. I-Gain:
Setting auto iris gain
2. RBF:
Setting remote back focus (RBF models only)
3. System
Accessing the System screen
3.1 Indicator: Setting the indicator on/off
3.2 Tally: Setting the tally function on/off
3.3 Cafs: Setting the CAFS
3.4 VR-Out: Setting virtual output
3.5 CamSeri: Enabling/disabling camera serial
communication
3.6 TalBrtness: Setting tally brightness
3.7 LensCode: Setting the lens code
4. AF
Accessing the AF screen ( AF models only)
4.1 Steps: Setting the number of steps for AF frame
movement
4.2 MoveSpeed: Setting AF frame speed
4.3 Accessing the Size screen
4.3.1 Horz: Horizontal AF frame size setting
Vert: Vertical AF frame size setting
4.3.2 ResetSize: Restoring default AF frame settings
5. Zoom
Accessing the Zoom screen
5.1 Movement: Setting zoom servo start characteristics
Setting zoom servo stop characteristics
Setting zoom mechanism end stop
characteristics
5.2 PreMovement: Setting zoom start characteristics
for preset operations
Setting zoom stop characteristics
for preset operations
5.3 CurveMode: Setting analog demand curve
characteristics
5.4 CamMode: Cam mode setting
5.5 Control: Setting the servo mode from the zoom demand
BT1-D005-A-ENG
1
2
3
4
5
6
7
8
9
6. Focus
7. Iris
8. IS
9. Reset All
Accessing the Focus screen
6.1 Curve: Setting focus demand curve characteristics
Accessing the Iris screen
7.1 [I-Gain]: Setting auto iris gain
Setting remote iris gain
7.2 Comp: Setting iris compensation on/off
7.3 Close: Setting iris closure detection on/off
Accessing the IS screen ( IS models only)
8.1 Mech.Lock: IS mechanical lock setting
8.2 SwSetting: IS operation switch setting
8.3 OffState: IS mode setting
Resetting to defaults
©2022.04 CANON INC.
Setting - <Setting> - I-Gain
1. Setting auto iris gain
Setting screen
<Setting>
I G :
5 0
I-Gain:
50
RBF:
000
System
<Setting>
I G :
5 0
I-Gain:
50
RBF:
000
System
to adjust
Note
• When adjusting gain while checking iris operation, set the camera iris mode to [AUTO].
• Set so that maximum gain is obtained within the range where focus hunting does not
occur.
• The iris gain setting is not reset if settings are reset as described on page 1.
Selection item
01
Function
Minimum gain
–
99
Maximum gain
Default value: 50
6/20
Advertisement
Table of Contents
