Is Operation Switch Setting (Is Models Only); Is Mode Setting (Is Models Only); Resetting To Defaults - Canon UJ122x8.2B AF Operation Manual

Setting
Setting - <Setting> - <IS> - SwSetting
8.2 IS operation switch setting
Two types of operation (Alt/Mom) are available for the IS
operation switch.
<IS>
I G : 5 0
IS screen
Mech.Lock : OFF
SwSetting: Alt
OffState: OFF
× 2
<IS>
I G : 5 0
Mech.Lock : OFF
SwSetting: Alt
OffState: OFF
to select
Selection item Alt
(D)
Function Alternate operation
BT1-D005-A-ENG
Setting - <Setting> - <IS> - OffState
8.3 IS mode setting
(IS models only)
Two modes of IS operation (Off/IS standard characteristics) are
available for when the IS operation switch is set to off.
IS screen
Mom
Selection item
Momentary operation
(D): Default value Function
(IS models only)
<IS>
I G : 5 0
Mech.Lock : OFF
SwSetting: Alt
OffState: OFF
× 3
<IS>
I G : 5 0
Mech.Lock : OFF
SwSetting: Alt
OffState: OFF
to select
OFF Std
(D)
IS operates with standard
IS operation stops
characteristics
(D): Default value
©2022.04 CANON INC.
Setting - <Setting> - <Reset All>

9. Resetting to defaults

Values in the following table can be reset.
Setting screen <Setting>
I G : 5 0
I-Gain: 50
RBF: 000
System
× 9
<Setting>
I G : 5 0
Iris
IS
Reset All
Reset All
I G : 5 0
screen Reset All
OK? y / n
to select
to confirm
Selection item y
Function Resets the settings
Setting item
Indicator on/off setting
Tally function on/off setting
CAFS on/off setting
Virtual output on/off setting
Tally brightness setting
AF frame steps setting
AF frame speed setting
Horizontal AF frame setting
Vertical AF frame setting
Zoom servo start characteristic settings
Zoom servo stop characteristic settings
Zoom mechanism end stop characteristic settings
Zoom start characteristic settings for preset operations
Zoom stop characteristic settings for preset operations
Analog demand curve characteristic settings
Servo mode setting from zoom demand
Cam mode setting
Focus demand curve characteristics
Iris compensation on/off setting
Iris closure detection on/off setting
– n
Maintains current settings
Default value
ON
ON
ON
ON
Factory-set value
3
5
000
000
50
50
99
99
91
5
Sped
0
STD
ON
Factory-set value
17/20