Timer; Cooking Time; End Of Operation; Preset Operation - NEFF B46W74.0GB Instruction Manual

Touch the 7 button.
1.
Scroll the NeffNavigator® until "Clock mode" is selected, and
2.
push down.
Scroll the NeffNavigator® in order to select either "24h" or
3.
"12h (AM/PM)".
To apply the setting, push down, and touch the
4.

Timer

You can use the minute minder as an egg timer or a kitchen
timer. The appliance does not switch on and off automatically.
Touch the button.
7
1.
Scroll the NeffNavigator® until "Timer" is selected, and push
2.
down.
Scroll the NeffNavigator® in order to set the desired period
3.
(e.g. 5:00 minutes).
Wait 3 seconds or push the NeffNavigator® down to apply
your setting.
Once the set period has elapsed, a signal sounds and the
symbol flashes.
V
Touch the button.
7
4.

Cooking time

The appliance switches off automatically after a set cooking
time (e.g. 1:30 hours).
Set the operating mode and temperature.
1.
Press NeffNavigator® down.
2.
Scroll the NeffNavigator® until "Cooking time" is selected,
3.
and push down.
Scroll the NeffNavigator® in order to set the desired cooking
4.
time (e.g. 1:30 hours).
Touch the m button.
5.
&LUFR7KHUP
 
Once the cooking time has elapsed, a signal sounds, the
symbol flashes and the set operating mode is stopped.
x
Touch the 7 button.
6.
Press and hold the button for 2 seconds.
~
7.

End of operation

The appliance switches off automatically at a set time
(e.g. 12:30).
Set the operating mode and temperature.
1.
Press NeffNavigator® down.
2.
Scroll the NeffNavigator® in order to select "End of
3.
operation", and push down.
Scroll the NeffNavigator® in order to set the desired end of
4.
operation (e.g. 12:30).
Touch the m button.
5.
 
Once the end of operation is reached, a signal sounds, the
symbol flashes and the set operating mode is stopped.
y
Touch the button.
7
6.
Press and hold the button for 2 seconds.
~
7.
12
7
 ƒ&
  K
&LUFR7KHUP
 ƒ&

Preset operation

The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
button.
the cooking compartment for too long.
Set the operating mode and temperature, and push down the
1.
NeffNavigator®.
Scroll the NeffNavigator® in order to select "Cooking time",
2.
and push down.
Scroll the NeffNavigator® in order to set the desired cooking
3.
time (e.g. 1:30 hours).
Wait 3 seconds or push the NeffNavigator® down to apply
your setting.
Scroll the NeffNavigator® in order to select "End of
4.
operation".
Push down and scroll the NeffNavigator® in order to set the
5.
desired end of operation (e.g. 12:30).
Touch the
6.
The set operating mode does not start immediately. The
cooking compartment light goes out. The appliance waits
until the appropriate time to start (for example at 11:00).
 
Once the end of operation is reached (for example at 12:30),
a signal sounds, the
operating mode is stopped.
Touch the
7.
Press and hold the
8.

Correcting or cancelling settings

Touch the
1.
Scroll the NeffNavigator® in order to select the clock
2.
function, and push down.
Scroll the NeffNavigator® in order to correct the setting
3.
or
Scroll the NeffNavigator® and turn the setting back to
"00:00" in order to cancel the setting.
Your setting is applied after 3 seconds.
 
button.
m
&LUFR7KHUP
 ƒ&
  K
y and x symbols flash and the set
button.
7
button for 2 seconds.
~
button.
7