Period Selector; Playback Method Selector - Hawking Net-Vision HNC700PT User Manual

5.7.1.2 Period Selector

Period Selector provides you a precise way to choose the start time and the end time
of a new period. The end time should be larger than the start time. After you have
given the correct start and end times, clicking on the "Play" button in the Jog Dial.
The system will display the new period in the display area and change the period
start and the end time labels. The Pull Bar and Histogram Area will be changed, too.
If the selected period is not present in the database, the data in the period selector
will be changed back to the previously correct start and end times and a warning
message will be shown.

5.7.1.3 Playback Method Selector

Full Range
If you select this method, the database will be displayed from the beginning to the
end of this location. Any change in the period selector will have no effect unless you
change this selector to "Time Period".
Time Period
If you change the playback method to "Time Period", you can modify the start and
end times in the period selector. When you click on the "Play" button in the Jog Dial,
the period you have selected will be displayed.
Events Preview
This method changes the display mode from the Normal display mode to the Event
Preview mode or vice versa.
The program will save the previous start and end time settings in "Time Period"
mode. Therefore, if you want to change the Period Selector to see in another period,
Management & Control Software User's Manual
Figure 5-12 Time Interval Selection Dialog
5-69 - –