Using Tools; Selector Tools; Location Selector - Hawking Net-Vision HNC700PT User Manual

Chapter 5 Playback

5.7 Using Tools

This section discusses the method of how to use the tools in the control area, as
shown in Figure 5-1.

5.7.1 Selector Tools

Figure 5-11 shows the Selector tools. These are: Location Selector, Period Start
Time Selector for the selection of the beginning time, Period End Time Selector for
the selection of the ending time, Playback Method Selector, and Alert Area Selector.

5.7.1.1 Location Selector

The Location Selector lets you select the camera you want to view from (refer to
Figure 5-11). The location information is the same as the location name associated
with the dedicated channel in the Monitor program. If there are more than one time
segments in the same location, another dialog will appear (as shown in Figure 5-12).
You must select an interval in that dialog. If your selection is correct, the Playback
program will automatically switch to that location and start to display.
Figure 5-11 Selector Tools
5-68 - –