Indicators; Control Area; Status Area; Area Selection Indicator - Hawking Net-Vision HNC700PT User Manual

Chapter 5 Playback
5.3.1.2 Histogram Area
The Histogram is an interactive control. In the control, you can display events' time
domain location and the percentage of motion. You can also select a group of events
or a specific period, from the Histogram Area.

5.3.1.3 Control Area

The Control Area contains most of the control selections and toolboxes you need to
browse the database, except Page Control. The Page Control Tool is located on the
bottom-right corner of the Display Area when the program is operating in the event
preview mode (as shown in Figure 5-3). The control tools include: Location Selector,
Period Selector, Playback Method Selector, Jog Dial, Display adjustment, Searching
Range Adjustment, Exporting, and System Control. Details are discussed in Section
5.7 "Using Tools".

5.3.1.4 Status Area

The Status Area is located at the bottom of the main window. It shows all program
status information, including display mode, display size, display speed, exporting
file format, and exporting file name.

5.3.2 Indicators

5.3.2.1 Area Selection Indicator

As shown in Figure 5-1, the Display Area is surrounded by a blue rectangle. This is
the Area Selection Indicator. This can be set to indicate either the Display Area or
the Histogram Area. Move your mouse cursor to the area you want to select. When
you have selected the Display Area, the Display Adjustment Tool will appear in the
control area. If you have selected the Histogram Area, the Display Adjustment Tool
will disappear and the Searching Range Adjustment Tool will be shown in the same
place of the control area.
5.3.2.2 Frame Selection Indicator
The Frame Selection Indicator only appears when you change the display mode to
event preview mode (as shown inFigure 5-3). It is a red rectangle surrounding to one
5-60 - –