The Layout - Hawking Net-Vision HNC700PT User Manual

Chapter 2 Monitor
disappear. These operations are shown in Figure 3-19.
Move mouse cursor here, and
then release the mouse button
Note: Even the channel is closed for current layout. The network connection is still
connected. The reason to keep the connection is that if the connection is closed, it is
not possible for Monitor to judge if any event is triggered.

3.6.2 The Layout

There are six kinds of layouts shown in Figure 3-20 for displaying frames in the
Monitor tool. You can select one of them by clicking on the left mouse button over
the layout icon you want. In each layout, you can select, drag, and drop the "channel
number" to any display frame in the video area. The video from the remote site will
be shown. Following the procedures described in Section 3.6.1.1, you can add the
video of the channel to the display frame of the selected layout in the video area one
by one. After that, you can also exchange video between different display frames by
the same select, drag, and drop method.
Press and hold mouse button here.
Figure 3-19 Close the Channel
3-34 - –