Schedule In Event Mode - Hawking Net-Vision HNC700PT User Manual

Chapter 5 Playback
Period picker
Figure 4-9 Period Picker, Apply button and Erase button

4.3.3 Schedule in event mode

You can select to record in Event mode or Continuous mode by the Schedule mode
selector as shown in Figure 4-10. There are two types of event recording, please
refer to Section 4.3.3.1 and Section 4.3.3.2 for more information.
4.3.3.1 Motion detection
Figure 4-11 shows the window selection you want to record when motion detection
is triggered.
4.3.3.2 Digital input
Figure 4-12 shows the four digital input conditions. Select the triggering condition
that you would like to start recording.
Figure 4-10 Schedule Mode Selector
Figure 4-11 Motion Detection Selector
Figure 4-12 Digital Input Selector
4-54 - –
Apply Erase