Using Monitor Tool; Connection Of The Video Server / Network Camera Series - Hawking Net-Vision HNC700PT User Manual

3.6 Using Monitor Tool

This section depicts methods of manipulating the Monitor tool.
3.6.1 Connection of the Video Server / Network
Camera Series
Channel:
Once you have connected a Video Server / Network Camera series product, you can
drag and drop the camera to the video area. As for the channel area shown in Figure
3-15, if you have not set up the camera for the channel, the color of the channel
number will be gray. Once you have set up the camera in the channel, the color of
the channel number will be blue. This also means that this channel is associated with
the remote Video Server / Network Camera series product. You can then click, drag,
and drop the camera to the video area to monitor the remote video, and apply other
features, if your privileges allow.
There is a unique light signal associated with each channel number. It indicates the
status of the dedicated channel, as listed below.
Off (Black)
The channel is not connected with any remote Video Server / Network Camera
series product.
Green
The green light means the Video Server / Network Camera series product
associated with this channel number is connected, and the video is being
monitored in the video area.
Orange
The orange light indicates the video from this channel is recording into the media
database. In this mode, you do not need to click, drag, and drop the channel to the
video area. This means the application software supports real-time recording
with and without real-time monitoring for the dedicated channel.
Management & Control Software User's Manual
3-29 - –