Firstech COMPUSTAR T13/R5 Master Manual page 9

LCD wake:
A single tap will wake the LCD screen while in sleep mode.
Status Update:
While the LCD is awake, a single tap will update the current status of the vehicle (as
long as its within range of the remote). At this point you will see the vehicle battery voltage and
temperature read out (if equipped with temp sensor)
Enter User Features:
This will allow access to make changes to, enable/disable, or select remote or
user features.
Runtime Extension:
A double tap at any time while the vehicle is remote started will "re-start" the
runtime back to the original runtime.
Remote Start/Remote Stop:
This will activate or deactivate the remote start sequence
Remote power Up:
This will power on the LCD anytime it is powered off and charged. NOTE: This
remote will ship with the LCD powered off.
Remote power down:
Once the power down function is selected within the User feature settings this
will power the remote LCD down.
Unlock:
Unlocks the doors (if equipped) and or Disarms the Firstech security system (if equipped) along
with any Firstech accessory that may be installed.
AUX 1:
This will activate any POC assigned AUX 1 output or AUX 1 action over data. This function does
offer alternative icons within the User feature settings. Note: Secure AUX mode will affect AUX 1 and 2
procedure steps) please contact your install tech or dealer if more info is needed.
Trunk Release:
Will activate any POC programmed as trunk release output, or Trunk release function
over data, included power rear lift gates (same steps to open or close rear power lift gate)
9