Firstech COMPUSTAR T13/R5 Master Manual page 14

2WR5 Remote Button Functions
Button Hold time
4 sec
0.5 sec
0.5 sec x 2
2.5 sec
2WR5 Remote User Features
Single TAP THEN HOLD for 5 seconds to ENTER the user feature settings. Note: Once a
selection is made it will automatically exit the menu.
Feature
Enter feature settings as shown above: Tap start/start button 1 time to enable/disable the
Proximity
proximity unlock feature. RED Flashing LOCK icon indicate OFF. BLUE Flashing UNLOCK icon
Unlock
Remote Enter feature settings as shown above: Double Tap Start/Stop button to enable/disable remote
Silent beep. BLUE Flashing LOCK icon and beep indicate ON Flashing UNLOCK icon and NO beep
mode
Power Enter feature settings as shown above: Hold Start/Stop button for approximately 5 seconds to
down power down the remote. NOTE: HOLD Start/Stop button for 4 seconds to power up
2WR5 Button functions
Hold this button for 4 seconds to power up the remote
Single tap to lock and/or arm your Firstech system
Double tap button to unlock and/or disarm your Firstech system
Hold button for 2.5 seconds to remote start or remote stop your vehicle.
2WR5 Remote user Features
Function/Description
indicates beep is OFF
Function description
indicates ON
14