Page 1
EASTRON SDM630-Mbus V2 User Manual SDM630-Mbus V2 DIN Rail Smart Meter for Single and Three Phase Electrical Systems Measures kWh Kvarh, KW, Kvar, KVA, P, F, PF, Hz, dmd, V, A, etc. Bi-directional measurement IMP & EXP ...
Page 2
60 minutes. In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the product. SDM630-Mbus V2 supports max. 100A direct connection, saves the cost and avoid the trouble to connect external CTs, giving the unit a cost-effective and easy operation. Built-in interfaces provides pulse and Mbus outputs.
Page 3
EASTRON SDM630-Mbus V2 User Manual Start-up Screens The first screen lights up all display segments and can be used as a display check second screen indicates firmware installed in the unit and its build number. The interface performs a self-test and indicates the result if the test passes.
Page 4
EASTRON SDM630-Mbus V2 User Manual Phase to neutral voltages(3p4w) Phase to neutral voltages(3p3w) Current on each phase Phase to neutral voltage THD%(3p4w) Phase to neutral voltage THD%(3p3w) Current THD% for each phase Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Page 5
EASTRON SDM630-Mbus V2 User Manual Frequency and Power factor and Demand Each successive pressing of the button selects a new range: Frequency and Power Factor (total) Power Factor of each phase Maximum Power Demand Maximum Current Demand Power Each successive pressing of the...
Page 6
EASTRON SDM630-Mbus V2 User Manual Instantaneous Reactive Power in kVAr Instantaneous Volt-amps in KVA Total kW, kVArh, kVA Energy Measurements Each successive pressing of the button selects a new range: Imported active energy in kWh Exported active energy in kWh Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Page 7
EASTRON SDM630-Mbus V2 User Manual Imported reactive energy in kVArh Exported reactive energy in kVArh Total active energy in kWh Total reactive energy in kVArh Set-up To enter set-up mode, pressing the button for 3 seconds, until the password screen appears.
Page 8
EASTRON SDM630-Mbus V2 User Manual To exit setting-up mode, press repeatedly until the measurement screen is restored. Set-up Entry Methods Some menu items, such as password, require a four-digit number entry while others, such as supply system, require selection from a number of menu options.
Page 9
EASTRON SDM630-Mbus V2 User Manual 3) After setting the last digit, press to exit the number setting routine. The SET indicator will be removed. Change password Use the choose the change password option Press the to enter the change password routine. The new password...
Page 10
EASTRON SDM630-Mbus V2 User Manual Press to exit the number setting routine and return to the Set-up menu. SET will be removed DIT Demand Integration Time This sets the period in minutes over which the current and power readings are integrated for maximum demand measurement.
Page 11
EASTRON SDM630-Mbus V2 User Manual Backlit set-up The backlit lasting time is settable Default lasting time is 60minutes For example, if it’s set as 5, the backlit will be off in 5minutes from the last time operation on the meter.
Page 12
EASTRON SDM630-Mbus V2 User Manual Press to confirm the selection. SET indicator will appear. Press to exit the system selection routine and return to the menu. SET will disappear and you will be returned to the main Set-up Menu Pulse output This option allows you to configure the pulse output 1.
Page 13
EASTRON SDM630-Mbus V2 User Manual Pulse rate Use this to set the energy represented by each pulse. Rate can be set to 1 pulse per dFt/0.01/0.1/1/10/100kWh/kVArh. (It shows 1 impulse = 10kWh/kVArh) From the Set-up menu, use buttons to select the Pulse Rate option.
Page 14
EASTRON SDM630-Mbus V2 User Manual From the Set-up menu, use buttons to select the Pulse width option. Press to enter the selection routine. The current setting will flash. buttons to choose pulse width. On Completion of the entry procedure, press...
Page 15
EASTRON SDM630-Mbus V2 User Manual Press button to enter the selection routine. The current setting will be flashing. buttons to choose Modbus Address(001 to 250) Mbus secondary address It ranges from 00 00 00 01 to 99 99 99 99...
Page 16
EASTRON SDM630-Mbus V2 User Manual buttons to choose Baud rate 0.3k, 0.6k, 1.2k, 2.4k, 4.8k, 9.6k Default is 2.4k On completion of the entry procedure, press to confirm the setting and press to return to the main set up menu.
Page 17
EASTRON SDM630-Mbus V2 User Manual From the Set-up menu, use buttons to select the Stop Bit option. Press to enter the selection routine. The current setting will flash. buttons to choose Stop Bit (2 or 1) On completion of the entry procedure, press to confirm the setting and press to return to the main set up menu.
Page 18
EASTRON SDM630-Mbus V2 User Manual Press to confirm the setting and press to return to the main set up menu. Specifications Measured Parameters The unit can monitor and display the following parameters of a single phase two wire(1p2w), three phase three wire(3p3w) or four phase four wire(3p4w) supply.
Page 19
EASTRON SDM630-Mbus V2 User Manual Current 0· 5% of nominal Frequency 0· 2% of mid-frequency Power factor 1% of unity (0.01) Active power (W) ±1% of range maximum Reactive power (VAr) ±2% of range maximum ...
Page 20
EASTRON SDM630-Mbus V2 User Manual Reference Conditions of Influence Quantities Influence Quantities are variables that affect measurement errors to a minor degree. Accuracy is verified under nominal value (within the specified tolerance) of these conditions. Ambient temperature 23°C ±2°C ...