Easee Equalizer (E02-EQP). Not for use with the Installation instructions Easee Equalizer HAN version. Troubleshooting Power meter: Eastron SDM630MCT-RC 3-phase meter reader Power supply: Tufvassons electricity transformer (part no. PSLR 30 230/24VDC) Cable:...
QR code below. TIPS! Prepare installation in a new encapsulation (not included): — 4 Modules for Eastron 3-phase meter reader. — 3 Modules for Tufvasson’s electricity transformer . — 3 Modules for fuse 10A 3 pole (not included).
Page 5
Wiring Connection Rogowski / CT clamps RJ 12 Power supply 24 V DC Power meter...
Page 6
— Connect Equalizer to the metre reader. — Update Equalizer to at least v.99 (takes up to 10 min). — Set metre type -> Eastron SDM. — Set main fuse limit -> 100%. — Set circuits for load balancing -> Circuit (on).
Installation - robot. If you do not succeed in connecting the Configure the Eastron 3-phase meter. Equalizer to Wi-Fi via the Easee Installer App, — The charging robot and the metre reader you can try moving the Equalizer towards the are installed in the same phase sequence.
Page 8
Equalizer that the customer gets via their Easee app. Here you can confirm that the same ampere values are displayed as on the Eastron meter. Ampere values can be found on the Eastron metre by clicking on [U / I] and scrolling to...
Page 9
Assistance Make sure to have the serial number available for the Easee Home and Equalizer to receive more rapid assistance. Easee Customer Excellence Telephone: 02039946725 Email: support@easee.com...
Page 10
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. The latest version of this publication can be downloaded at http://easee.support No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including, but not limited to, copying, recording, retrieving data, or computer networks without the written permission of Easee AS.