GigaPan EPIC Pro User Manual page 85

take a photograph the number of times set in the 'Shutter
Retries' function.
1. From the EPIC Pro 'Main Menu', select the 'Options' sub
menu and press OK.
2. From the 'Options' submenu select the 'Expert Options'
sub menu and press OK.
3. Select the 'Shutter Feedback' menu item and press OK.
4. Select the 'ON' setting and press OK.
5. The 'Shutter Retries' menu item will now appear in the
menu since 'Shutter Feedback'
is set to 'ON'. Select the 'Shutter Retries' menu item and
press OK.
6. Select the number of times that you want the EPIC Pro
to retry triggering the shutter
and press OK.
7. Connect the optional user supplied cables PC end to the
camera body's PC
connector. Connect the mini plug end of the cable to the
remote trigger port of the EPIC Pro. The remote trigger port
is located underneath the right hand side of the EPIC Pro
LCD panel. Note, that you can buy a hotshoe adapter if your
camera does not have a PC port.
NOTE:
The 'Shutter Feedback' function is good at detecting when
the shutter has not been actuated, but it may not detect a
successful shutter trigger after a failure. So once you see