GigaPan EPIC Pro User Manual page 83

Use the up and down buttons to change the actual value
that is highlighted by two upward arrows. Press OK when
you have set the desired amount of time.
5. If you chose 'Ext trigger' then you will need a remote
shutter device with a Canon E3 mini plug style connector. It
can be wired or wireless. Connect it to the remote trigger
port on the EPIC Pro.
6. Now return to the 'Main Menu' by pressing the X button.
Select 'New Panorama' from the main menu.
7. After setting up the 'New Panorama' the EPIC Pro will
capture the panorama and either wait for the timer or a
button press from the remote shutter that is connected to
the remote trigger port.
8. When you want to exit the repeated capture of
panoramas, press the X button to quit.
Additional information
Some things to consider before starting a time lapse series:
• If you are mounting the EPIC Pro on a structure or a pole,
is it secure? Will it present a
danger to any people in the area if it falls? Safety first. •
How are you going to power the EPIC Pro and the
camera body? • How are you going to store all of the
images? • Is the equipment protected from weather such
as rain?
4.5 Save/Load Config
There are three configuration memories A, B, and C that you
can use to save settings. The configurations may allow you