GigaPan EPIC Pro User Manual page 84

to save a significant amount of time switching between
lenses or cameras.
Saving or Loading a configuration 1. From the EPIC Pro
'Main Menu', select the 'Options' sub menu and press OK. 2.
Select the 'Save/Load Config' menu item and press OK.
3. Select one of the configuration memory locations A, B,
or C and press OK.
4.6 Last Pic Hold
When the 'Last Pic Hold' function is set to 'ON', the EPIC Pro
will keep the half button press signal asserted so that the
camera is ready for the next panorama. This is very useful
for time lapse panoramas.
1. From the EPIC Pro 'Main Menu' select the 'Options'
submenu and press OK.
2. From the 'Options' sub menu select the 'Expert Options'
submenu and press OK.
3. Select the 'Last Pic Hold' menu item and press OK.
4. Select the 'ON' and press OK.
37
4.7 Shutter Feedback
3
The 'Shutter Feedback' function tells the EPIC Pro whether
the shutter was triggered by using the strobe signal from
the PC connector or hotshoe. When 'Shutter Feedback' is
set to 'ON' and a cable is connected along with a shutter
speed that is less than 1/250s the camera will attempt to