Sony FCB-IX47 Instruction Manual page 13

FUNCTIONS
Digital Effect
It consists of the following functions. They are all executed via the field memory.
• Still : Motion Image on Still Image
• Flash : Continuous Still Image
• Lumi : Motion Images on Binaried Still Image
• Trail : Afterimage Lag of Motion Subject
Others
0 LuxShot
The FCB-IX470/P is equipped with a motorized mechanism to remove the internal IR cut filter on demand, making the
camera sensitive to close IR. An additional IR lighting may be added by switching the IR LEDs ON. In this latest mode, the
FCB-IX470/P can shoot without external light, achieving a minimum sensitivity of 0 lx.
1.0
0.8
Cy
0.6
0.4
0.2
0.0
400 450 500
Wave Length [nm]
CCD Visible Spectral Response
The supplied IR LED has a limited energy range allowing a working distance of approximately 2 to 3 meters.
NOTE : In the "0 lx" shot mode, the iris is fixed at F1.4 and high speed shutter control cannot be
performed. Only the gain and low speed shutter can be controlled. However, iris and shutter
values displayed may differ from the actual values. Do not suspect a fault.
In the "0 lx" shot mode, the picture looks slightly greenish, like an image intensifier picture.
This may be suppressed by selection of the "Black & White" mode in the "Picture Effect"
menu.
Mirror image
The video output from the camera can be reversed left and right using this function.
Freeze
This function captures an image in the field memory of the camera so that this image can be output continuously.
Ye
G
Mg
550 600 650 700
Ta = 25°C
8
Peak = 857.3 nm
6
4
2
0
500 650 800
IR LED Spectral Response
FCB-IX47/IX47P
FCB-IX470/IX470P
950 1100
11