PRODUCT SAFETY modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. WARNING: Some dust created by power sanding, Unmodified plugs and matching outlets will reduce risk sawing, grinding, drilling and other construction of electric shock.
Page 6
SAFETY INSTRUCTIONS FOR ALL long hair can be caught in moving parts. g) If devices are provided for the connection of dust OPERATIONS extraction and collection facilities, ensure these are connected and properly used. Use of these Safety warnings common for grinding, sanding, wire devices can reduce dust-related hazards.
Wear personal protective equipment. Depending excessive accumulation of powdered metal may cause on application, use face shield, safety goggles or electrical hazards. safety glasses. As appropriate, wear dust mask, Do not operate the power tool near flammable hearing protectors, gloves and workshop apron materials.
Page 8
have the work securely clamped. These wheels will line of cut and near the edge of the workpiece on both grab if they become slightly canted in the groove, and sides of the wheel. h) Use extra caution when making a “pocket cut” can kickback.
Power Cord Auxiliary Handle Cap for auxiliary handle Collet Nut On/Off Switch 10. Original cap TECHNICAL DATA Type Designation WS3113KU.1 (DM160) (31- designation of machinery, representative of rotary tool) Rated voltage 120V~60Hz Rated power 1.4A Rated no load speed 8000-35000/min Collet size 3/32”...
Page 10
ACCESSORIES Front auxiliary handle Cap for auxiliary handle Flexible shaft Safe guard 82pcs accessories: 25pcs x Cut off wheel 25pcs x Sanding paper 8pcs x Grinding wheel with shank(3.2mm) 1pc x Sanding shank(3.2mm) 5pcs x Sanding band 2pcs x Drill(2.3/3.2mm) 2pcs x Diamond bit (3.2mm) 2pcs x Mandrel (3.2mm) 4pcs x Felt wheel...
Page 11
OPERATING INSTRUCTIONS counter-clockwise. Insert the flexible shaft inner cable (b) into the motor shaft (a) NOTE: Before using the tool, read the instruction until the stopper (c) touches the collet nut. book carefully. Tighten the collet nut with collet spanner if necessary. Thread the flexible shaft nut (d) onto the tool housing by INTENDED USE turning it clockwise.
USING ACCESSORIES The chart below lists the description, use speed and scope for some of the small articles supplied together with the tool by category. To achieve best performance of the tool, it is strongly recommended that you read it prior to operation, failure to adhere to this may cause accessories to fail.
MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.